Materials Needed:
Print-&-Stick (2 sheets)
MatCrafter (any color)
Craft Knife or Scissors
Straight Edge
Optional (Candy Valentine Hearts)
Computer
Color Printer
Double Stick Tape or Glue

Instructions:

1. Download Puppy Love MatCrafter Project pdf layouts for inside mat and outside Mat Here.

2. Insert Print-&-Stick paper in your color printer.

3. Print both layouts for inside mat and outside mat designs in color at 100% size from the downloaded pdf layouts. (Tip: Print on regular paper first to make sure that your size and color settings are correct before printing on Print-&-Stick Paper)

4. Using the black trim marks printed on the mat designs, cut the layouts down to size.

5. Peel the release sheet from the back non-printed side of the Print-&-Stick mat design layouts one at a time.

6. Center the printed inside design, adhesive side to front of mat and press down on matboard for inside and outside mats matching sizes respectively.

7. Press printed design down on mats firmly.

8. Lay mats with designs stuck on them face down on a flat surface and with a craft knife trim the inside of the design to fit the mat cut out.

9. Use double stick tape to stick together inner and outer mats. You can also use glue.

10. Insert your 4x6 photo into the special U-Channel opening

11. Display by opening easel back or using horizontal or vertical hang tab to hang on wall.

12. You’re done! Wasn't that fun and easy?